Xuan Linh Nguyen, Hoang Nghia Vu, Sangseok Yu, 2021, “Parametric understanding of vapor transport of hollow fiber membranes for design of a membrane humidifier”, Renewable Energy, 177, November, pp.1293-1307, SCI
Hoang Nghia Vu, Xuan Linh Nguyen, Jaeyoung Han, Sangseok Yu, 2021, “A study on vapor transport characteristics in hollow-fiber membrane humidifier with empirical mass transfer coefficient”, International Journal of Heat and Mass Transfer, 177, November, pp.121549, SCI
Dongjin Yu, Byoungjae Kim, Ngoc Van Trinh, Hyunjin Ji, Sangseok Yu, 2021, “Analysis of phase change heat transfer with annulus 1 kW class methanol steam reforming reaction under high-pressure operation” International Journal of Hydrogen Energy, 46(56), October, pp.28775-28788, SCI
Ngoc Van Trinh, Younghyeon Kim, Hongio Kim, Sangseok Yu, 2021, “Evaporation of Methanol Solution for a Methanol Steam Reforming System”, Energies, 14(16), October, pp.4862, SCI
Taehyung Koo, Young Sang Kim, Young Duk Lee, Sangseok Yu, DongkeunLee,, Kook Young Ahn, 2021, “Exergetic evaluation of operation results of 5-kW-class SOFC-HCCI engine hybrid power generation system”, Applied Energy, 295, October, pp.117037, SCI
Jinwon Yun, Ngoc Van Trinh, Sangseok Yu, 2021, “Performance improvement of methanol steam reforming system with auxiliary heat recovery units”, International Journal of Hydrogen Energy, 46(49), July, pp.25284-25293, SCI
Huu Linh Nguyen, Jaesu Han, Xuan Linh Nguyen, Sangseok Yu, Young-Mo Goo, Duc Dung Le, 2021, “Review of the Durability of Polymer Electrolyte Membrane Fuel Cell in Long-Term Operation: Main Influencing Parameters and Testing Protocols”, Energies, 14(13), July, pp.4048, SCI
June Sik Hwang, Jong-Eun Park, Gun Woo Kim, Hyeono Nam, Sangseok Yu, Jessie S.Jeon, Sanha Kim, Huseung Lee, Minyang Yang, 2021, “Recycling silver nanoparticledebris from laser ablationof silver nanowire in liquid mediatoward minimum material waste”, Scientific Reports, 11, January, pp.2262, SCI
Taehyung Koo, Young Sang Kim, Dongkeun Lee, Sangseok Yu, Young Duk Lee, 2021, “System simulation and exergetic analysis of solid oxide fuel cell power generation system with cascade configuration”, Energy, 214, January, pp.119087, SCI
Dongjin Yu, Ngoc Trinh Van, Jinwon Yun and Sangseok Yu, 2020, “A Thermal Design of a 1 kW-Class Shell and Tube Methanol Steam Reforming System with Internal Evaporator”, Processes, 8(11), November, pp.1509, SCI
Jaeyoung Han, Jaesu Han, Hyunjin Ji and Sangseok Yu, 2020, ““Model-based” design of thermal management system of a fuel cell “air-independent” propulsion system for underwater shipboard“, Internarional Journal of Hydrogen Energy, 45(56), November, pp.32449-32463, SCI
Jaeyoung Han, Sangseok Yu and Jinwon Yun, 2020, “PEMFC Transient Response Characteristics Analysis in Case of Temperature Sensor Failure”, Process, 8(11), October, pp.1353, SCI
Jaesu Han, Sangseok Yu and Jaeyoung Han, 2020,“Fault Detection and Isolation for a Cooling System of Fuel Cell via Model-based Analysis”, Processes, 8(9), September, pp.1115, SCI
Hyemin Song, Younghyeon Kim, Dongjin Yu, 2020, Byoung Jae Kim, Hyunjin Ji and Sangseok Yu, “A Computational Analysis of a Methanol Steam Reformer Using Phase Change Heat Transfer”, Energies, 13(17), August, pp.4324, SCI
Jinwon Yun, Younghyeon Kim and Sangseok Yu, 2020, “Interactive heat transfer characteristics of 5 kW class shell-and-tube methane steam reformer with intermediate temperature heat source”, International Journal of Hydrogen Energy, 45(41), June, pp.21767-21778, SCI
Jaesu Han, Jaeyoung Han and Sangseok Yu, 2020, “Experimental analysis of performance degradation of 3-cell PEMFC stack under dynamic load cycle”, International Journal of Hydrogen Energy, 45(23), April, pp.13045-13054, SCI
Jaeyoung Han, Jaesu Han and Sangseok Yu, 2020, “Investigation of FCVs durability under driving cycles using a model-based approach”, Journal of Energy Storage, 27, February, pp.1011696, SCI
Jaeyoung Han, Sangseok Yu and Sun Yi, 2019, “Oxygen excess ratio control for proton exchange membrane fuel cell using model reference adaptive control”, International Journal of Hydrogen Energy, 44(33), July, pp.18425-18437, SCI
J. Han, J. Hwang and S. Yu, 2019, “A simulation of automotive fuel cell system for oxygen starvation trends by compressor surge under load follow-up”, Applied Thermal Engineering, 154, May, pp.251-262, SCI
Jinwon Yun, Sangseok Yu, 2019, “Transient behavior of 5kW class shell-and-tube methane steam reformer with intermediate temperature heat source”, International Journal of Heat and Mass Transfer, 134, May, pp.600-609, SCI
J. Yun, Y. Kim, S. Yu, 2018, “Feasibility study of carbon dioxide separation from gas mixture by vortex tube”, International Journal of Heat and Mass Transfer, 126, November, pp.353-361, SCI
J. Han, and S. Yu, 2018, “Ram air compensation analysis of fuel cell vehicle cooling system under driving modes, Applied thermal engineering”, 142, September, pp 530-542, SCI
Byung-Ju Lim, Sang-Seok Yu, Kyung-Yul Chung, and Chang-Dae Park, 2018, “Numerical analysis of the performance of a tiltable multi-effect solar distiller”, Desalination, 435, June, pp.23-34, SCI
J. Han, J. Jeong, K. Cho, and S. Yu, 2018, “A Real-Time Combustion Instability Simulation with Comprehensive Thermo-Acoustic Dynamic Model”, Energies, 11 (4), April, pp.883, SCI
J. Yun, K. Cho, YD. Lee, and S. Yu, 2018, “Four different configurations of a 5 kW class shell-and-tube methane steam reformer with a low-temperature heat source”, International Journal of Hydrogen Energy, 43 (9), January, pp.4546-4562, SCI
Gahui Shin, Jinwon Yun and Sangseok Yu, 2017, “Thermal design of methane steam reformer with low-temperature non-reactive heat source for high efficiency engine-hybrid stationary fuel cell system”, International jounral of hydrogen energy, 42, May, pp.14697-14707, SCI
Jaeyoung Han, Sangseok Yu, and Sun Yi, 2017, “Adaptive control for robust air flow management in an automotive fuel cell system”, Applied Energy, 190, March, pp.73-83, SCI
Jaeyoung Han, Sangseok Yu, and Sun Yi, 2017, “Advanced thermal management of automotive fuel cell using a model reference adaptive control algorithm”, International journal of hydrogen energy, 42, February, pp.4328-4341, SCI
Heeseok Kang, Daehoon Lee, Kwantae Kim, Sungkwon Jo, SunghyunPyun, Younghoon Song and Sangseok Yu, 2016, “Methane to acetylene conversion by employing cost-effective low temperature arc”, Fuel processing technology, 148, July, pp.209-216, SCI
Jaeyoung Han, Jisoo Park, Sangseok Yu, 2015, “Control Strategy of cooling system for the optimization of parasitic power of automotive fuel cell”, International journal of hydrogen energy, 40 (39), October, pp.13549-13557, SCI
K.H. Ko, J.O. Choi, H. Lee, Y.K. Seo, S.P. Jung and S.S. Yu, 2015, “Cold spray induced amorphization at the interface between fe coatings and al substrate”, Materials Letters, 149, June, pp.40-42, SCI
Sun Yi, Sangseok Yu, Jung H. Kim and Taher M. Abu-Lebdeh., 2015, “Analysis of Time-Delayed Neural Networks via Rightmost Eigenvalue Positions”, American Journal of Engineering and Applied Sciences, 8(1), January, pp.1-10
Hyuntak Woo, Kanghun Lee, Jinwon Yun, Sangmin Lee, Sanggyu Kang, Kookyoung Ahn, and Sangseok Yu, 2014, “The Scale Up Characteristics of a Catalytic Combustor With Flow Uniformity Analysis”, Journal of Fuel Cell Science and Technology, 11(1), Febuary, pp.1-7, SCIe
Kanghun Lee, Sangseok Yu, Sang Min Lee, Kook-Young Ahn, and Sanggyu Kang, 2014, “Development of a coupled reactor with a catalytic combustor and steam reformer for a 5 kW solid oxide fuel cell system”, Applied Energy, 114(1), Febuary, pp.114-123, SCI
Hyunwoo Tak, Jinwon Yun, Jaeyoung Han, and Sangseok Yu, 2014, “Mass transfer characteristics of the hydrophilic membrane with the isolation of heat transfer effect by isothermal bath”, International Journal of Hydrogen Energy, 39(2), January, pp.958-965, SCI
Min Hur, Woo Seok Kang, Young Hoon Song, Dong Joo Kim, and Sang Seok Yu, 2013, "Discharge Mode Analysis in a Dielectric Barrier Discharge Reactor with Two Bar-Shaped Electrodes Separated by a Central Slit", Plasma Processes and Polymers, 10(12), December, pp1090-1099, SCIE
Ju-Hyeong Cho, Sang-Seok Yu, Man-Young Kim, Sang-Gyu Kang, Young-Duk Lee, Kook-Young Ahn, and Hyun-Jin Ji, 2013, "Dynamic modeling and simulation of hydrogen supply capacity from a metal hydride tank", International Journal of Hydrogen Energy, 38(21), July, pp.8813-8828, SCI
Kanghun Lee, Jinwon Yun, Kookyoung Ahn, Sangmin Lee, Sanggyu Kang, and Sangseok Yu, 2013, "Operational characteristics of a planar steam reformer thermally coupled with a catalytic burner", International Journal of Hydrogen Energy, 38(11), April, pp.4767-4775, SCI
S.M. Lee, Y.D. Lee, K. Y. Ahn, J. Y. Han, S. Im, and S.Yu, 2012, "Flow Uniformity of Catalytic Burner for Off-Gas Combustion of Molten Carbonate Fuel Cell", Journal of Fuel Cell Science and Technology, 9(2), February, pp. 021006-1~021006-6, SCI-E
S.G. Kang, K.D. Min, and S. Yu, 2012, “Dynamic modeling of a proton exchange membrane fuel cell system with a shell-and-tube gas-to-gas membrane humidifier”, International Journal of Hydrogen Energy, 37(7), April, pp.5866-5875, SCI
S. Y. Im and S. Yu, 2012, "Effects of geometric parameters on the separated air flow temperature of a vortex tube for design optimization", Energy, 37(1), January, pp.154-160, SCI
S. Y. Im and S. S. Yu, 2011, "Charged air cooling with vortex tube for a common-rail diesel engine", Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 225(6), June, pp.771-778, SCI
Yu, S., Im, S., Kim, S., Hwang, J., Lee, Y., Kang, S. and Ahn, K., 2011, "A parametric study of the performance of a planar membrane humidifier with a heat and mass exchanger model for design optimization", International Journal of Heat and Mass Transfer, 54(7-8), March, pp.1344-1351, SCI
S. Yu, J. Han, S. M. Lee, Y. D. Lee and K. Y. Ahn, 2010, "A Dynamic model of PEMFC system for the simulation of residential power generation", Journal of Fuel Cell Science and Technology, 7(6), December, pp.475-482, SCI-E
S. Yu and D. Jung, 2010, "A study of operation strategy of cooling module with dynamic fuel cell system model for transportation application", Renewable Energy, 35(11), November, pp.2525-2532, SCI-E
S. Yu, D. Hong, Y. Lee, S. Lee and K. Ahn, 2010, "Development of a catalytic combustor for a stationary fuel cell power generation system", Renewable Energy, 35(5), May, pp.1083-1090, SCI-E
S. Kang, K. D. Min, S. Yu, 2010, "Two dimensional dynamic modeling of a shell-and-tube water-to-gas membrane humidifier for proton exchange membrane fuel cell", International Journal of Hydrogen Energy, 35(4), February, pp. 1727-1741, SCI
S. S. Yu, Y.D. Lee, and K. Y. Ahn, "A Numerical Model of a proton exchange membrane fuel cell with large active area", Int'l Journal of Transport Phenomena, Volume 10, No.4, 2008, pp. 261-276
S. Yu, and D. Jung, "Thermal Management Strategy for a proton exchange membrane fuel cell with large active area", Renewable Energy, Apr., 2008, Vol. 33, Issues 11, pp. 2540~2548, SCI-E
D. Jung, S., Yu, and Dennis N. Assanis, "Modeling of PEM Fuel Cell with a Large Active Area for Thermal Behavior Analysis", Journal of Fuel Cell Science and Technology, FC-06-1082, Journal of Fuel Cell Science and Technology, Nov., 2008, Vol. 5,Issues 4, pp.1.~6 ,SCI-E
Yu, S., and Min, K.,"Effect of the Oil and Liquid Fuel Film on Hydrocarbon Emissions in Spark Ignition Engines", Journal of Automobile Engineering, IMechE, Vol 216, No. D9, pp. 759-771, Sep. 2002, SCI
Yu, S., Yi, H., Cho, H., Kim, M., and Min, K., "Modeling of the Dynamic Process of Fuel Absorption/Desorption in the Oil Film in SI Engines", JSME International Journal, Vol. 43 NO. 4, pp. 570-575, Nov., 2000, SCI
